The new MINI Cooper John Cooper Works Challenge takes track-driving performance to a new level and offers a thrilling on-road driving experience that doesn’t sacrifice everyday comforts and refinement.
Based on the ultimate performance MINI, the latest John Cooper Works Hatch, the Challenge takes more than just inspiration from the current Challenge-specification racing car.
The small, passionate development team, based at MINI Plant Oxford in the UK, worked in partnership with key suppliers on the racing car to deliver the best solutions for a genuinely credible track-day machine. With its super-sticky Michelin Pilot Sport Cup 2 tyres, adjustable suspension and limited slip differential, the MINI John Cooper Works Challenge takes bespoke track performance to levels never before seen in the hot-hatch class.
Limited to a maximum of 100 units, the exclusive MINI John Cooper Works Challenge features a unique colour combination and graphics, genuine MINI JCW Pro Accessories, and is available in one fixed specification only.
The basis for the new John Cooper Works Challenge is the MINI John Cooper Works Hatch, manufactured, like other MINI vehicles, at MINI Plant Oxford. It’s there that a small group of MINI employees had a dream to create a MINI specifically designed and developed to excel on a racing circuit, while maintaining perfectly useable manners on the public road. They collected their ideas outside of work time, fuelled by the desire to create a pocket rocket that truly unlocked the performance potential of the MINI Hatch on a racing circuit. Extensive testing was then carried out on a range of circuits throughout the UK, with considerable road mileage also accrued as the specification and settings of the car were fine-tuned.
MINI John Cooper Works Challenge came to life in “Building 71”, a nondescript unit at Plant Oxford that houses OX4 Racing, a racing team run exclusively by MINI employees. It can therefore be said that the new MINI John Cooper Works Challenge is truly a “works” car for the track, in the finest tradition.
The new MINI John Cooper Works Challenge uses the curent John Cooper Works Hatch as its basis – itself the most potent MINI ever produced. Powered by a 2-litre 4-cylinder engine featuring MINI TwinPower Turbo technology, model-specific design of the pistons, turbocharger and exhaust releases 231bhp and 320Nm.
These prodigious outputs enable a 0-100km/h time of just 6.3 seconds, with a top speed of 246km/h. The only gearbox option is a 6-speed manual.
The MINI John Cooper Works Challenge is readily identifiable by its bespoke body addenda, including enlarged air intakes at the front for increased cooling, uniquely contoured wheel-arch extensions and a rear spoiler. Inside, John Cooper Works sports seats and sports steering wheel create the perfect environment for driving enjoyment.
The John Cooper Works Challenge engineers turned to Nitron for the suspension, Mintex for the braking requirements, Quaife for the traction benefits of a limited slip differential and Team Dynamics for particularly lightweight alloy wheels. All these brands supply the MINI John Cooper Works racing car that competes in the top class of the UK MINI Challenge.
Not only was the team searching for ultimate track performance, but MINI John Cooper Works Challenge was also to be a car that rewarded enthusiast drivers on public roads, while maintaining everyday usability. To that end, it seemed imperative that John Cooper Works Challenge features a suspension that could be adjusted by the driver to the environment in which the car was being driven.
UK-based suspension supplier Nitron has provided coilover spring and damper units based on its NTR R1 system. These are adjustable for bump and rebound, as well as for overall ride height. The R1 is a direct development of the racing dampers used on the John Cooper Works racecar, and is hand-built with many titanium and hard-anodised parts to the very highest quality standards.
Camber adjustment plates on the front axle allow for an increase in negative camber, with John Cooper Works Challenge possessing two degrees of negative camber on both the front and rear axle. Thanks to both camber and castor being adjustable, the suspension geometry of the new car is significantly different to that of the standard car.
MINI John Cooper Works Challenge is supplied with recommended settings for both road and track driving, the damper units offering adjustment through numerous “clicks”, but owners can choose to experiment with their own settings to tune the car precisely to their own tastes.
For superior traction when powering out of corners, John Cooper Works Challenge is fitted with a Quaife automatic torque biasing (ATB) limited slip differential in place of the standard car’s open item. This proven component, which uses helical gears instead of a plate-type LSD, offers a seamless operation without any abrupt “lockup”, and assists braking performance as well as transferring power away from a spinning front wheel during acceleration. The Quaife ATB differential works in combination with all standard-fit electronic systems (DSC, Performance Control, etc).
Few aspects of a car affect track performance more than tyres, and the John Cooper Works Challenge engineering team spent a lot of time during the development process testing different makes and compounds to find not only a tyre that gave the most grip on a circuit, but one that also worked well on the road.
The solution was the acclaimed Michelin Pilot Sport Cup 2, original equipment for a host of high-performance cars, and uniquely able to summon extremely high grip levels without causing any refinement issues.
MINI John Cooper Works Challenge retains the 17-inch wheel size of the standard John Cooper Works Hatch, but features 215/45 R17 tyres on a 7.5-inch wheel, half an inch wider than the original specification rim that uses a 205/45 R17. The wheels are also specifically chosen for ultimate performance – the Team Dynamics Pro Race 1.2 rims save 1.5kg of unsprung mass per corner. Combined with the Michelin Pilot Sport Cup 2, this weight advantage further increases to 2.5kg per corner.
John Cooper Works Challenge employs grooved and part-drilled 330mm front discs with 4-pot Brembo-developed callipers, sourced from the MINI JCW Pro Accessories range. These are paired with specially developed Mintex brake pads. This combination offers superb braking power with excellent resistance to fade on track. Even so, no compromise with on-road braking response has been required, even when used from cold.
The new John Cooper Works Challenge takes full advantage of the MINI JCW Pro Accessories already available for John Cooper Works Hatch.
The JCW Pro Aerokit, which features lower front splitters, rear spoiler add-ons for the already large roof spoiler, rear diffuser and rear splitters for additional aerodynamic performance, enhances the already distinctive, aggressive exterior styling. The carbon fibre air intake further enhances the look of this new model, as do the carbon fibre mirror covers.
A JCW Pro exhaust with carbon fibre tailpipe finishers not only maximises the flow of spent gases, but also gives John Cooper Works Challenge a purposeful roar. It can be controlled via a Bluetooth link, offering a choice of Sport and Track sound levels.
The grooved brake discs are also taken from the JCW Pro Accessories range, although the Mintex pads fitted to the Challenge are unique to this model.
We pit the MINI JCW against the Porsche 911 GTS.